What Size Nails For Tongue And Groove Siding

Western Red Cedar has been a prized building material for thousands of years due to its versatility, longevity, and natural beauty. In more recent years, it has been identified and praised for its use in "green building". All-natural woods products, including Western Cherry Cedar, have been shown to accept the least impact on the environment through their life cycle. Western Red Cedar building materials crave less energy to produce than man-made alternatives, biodegradable, and completely renewable and sustainable.

For interior, as well as exterior use, Western Red Cedar tongue and groove (T&Yard) paneling can exist installed vertically, horizontally, or diagonally. Information technology is commonly used as an outside siding and cladding, in soffits and for ceilings, and either interior or outside accent walls or paneling.

In clear grades, Western Crimson Cedar T&M is ordinarily supplied in thicknesses of 7/16" or i" in either 4 or 6" widths, while knotty T&One thousand is commonly supplied in 1" thickness in either 4, vi, or 8" widths. Either are bachelor in a variety of profiles.

The various grades and thicknesses of T&G are designed for specific appearances and uses. Our sales team is happy to talk over these with y'all to ensure you receive the correct product for your intended utilise. Upon receipt of your Cedar T&G, it should be inspected to ensure it is the right product that yous and your salesperson discussed and that information technology is not damaged or visually unacceptable in any way before starting time installation. Please note, however, since Western Red Cedar is a natural cloth, color variations, besides as some defects, are allowable within each called grade.

Be sure to choose a fastener with a loftier level of corrosion resistance recommended for use with Western Ruby-red Cedar. Should your Cedar T&One thousand be installed nigh table salt h2o or in another surface area with high condensation, a severe level of corrosion-resistant fastener should be selected. Nosotros recommend using stainless steel ring shank nails in the appropriate grade for where the product is to exist installed. The nails used demand to penetrate at least 1 ¼" solid wood. Plywood, sheetrock and/or particleboard, or similar sheeting is Non considered solid forest.

HORIZONTAL or DIAGONAL INSTALLATION: Start at the bottom and work up with the groove edges facing downwards and the tongues upwards. Cedar T&Chiliad upwardly to 6" broad tin can exist "blind nailed" through the tongue at an guess 45-degree bending with one blast into each framing fellow member. Should the framing exist covered by sheetrock, plywood, or house wrap, earlier offset installation, snap a chalklike or mark a line over the roofing to ensure you blast at least 1-1/4" into the framing each and every time during installation. T&1000 wider than 6" and those starter pieces and ending pieces will need to be nailed to the framing through the face. As you motion upwardly the wall, be sure to tap each piece into place with a rubber mallet and check to be sure you are staying level.

Clear, Mixed Grain Western Red Cedar Tongue and Groove Paneling Exterior Accent Wall

We supplied the Clear, Mixed Grain Western Red Cedar Natural language and Groove Paneling for this stunning accent wall of the newly constructed Craft Stove in Mount Vernon, WA.

VERTICAL INSTALLATION: Since framing generally runs up and down, yous will demand to provide "nailers", horizontal blocking lines, or furring strips for the T&One thousand to exist installed properly. Each piece of Cedar T&G will need to exist secured to solid woods with at least a 1-ane/4" penetration approximately every 12". Once the nailers are in place, use a level or plumb line to ensure the starting time board is installed plumb. As with horizontal installation, pieces upwards to 6 inches in width can be blind nailed. Wider pieces, as well as those in the start and the end, will demand to be nailed straight through the face of the T&One thousand into the solid wood behind. Lightly tap each piece into to place and exist sure to you are staying plumb throughout your installation.

Knotty Western Red Cedar Tongue and Groove Siding Cladding installed vertically

We supplied the knotty Western Red Cedar T&G that was installed vertically on this cute little cabin on Guemes Island, WA.

Should you lot accept more than questions or concerns almost how to install your Western Red Cedar Tongue and Groove paneling, delight do not hesitate to talk over this with your salesperson before installation of your product to ensure your Cedar T&G will perform at its best for you.

Earlier your next project, be sure to visit us!

www.CedarCountryLumber.com

360.757.6343

950 B Fountain Street, Burlington WA